Startseite / Portfolio / Thermal Management / xEV Cooling / Distribution Modules
Verteilermodule
Kühlmodul – modulares Einzelventilsystem & Medienverteilsystem
Lieferumfang
Komponenten für das Thermomanagement – entweder modulare Einzelventile oder eine Gesamtlösung für die Medienverteilung (Kühlwasser/Öl)Vorteile
- Medienverteilsystem mit/ohne Ventil (Mischventil, 2-Wege-Regelventil)
- Steigerung der Effizienz thermischer Systeme
- Einsatz innovativer Werkstoffe (Polyketone / PPS / PA9TI)
- Selbstregulierende Fluiddichtung (Optimierung von innerer Leckage und Betätigungsmoment)
- Multi-Port: Vielzahl verschiedener Anpassungen möglich (Geometrien und Materialmix)
- Interne Geometrie für minimale Druckverluste
- Flexibler Einsatz anpassungsfähiger Aktoren


Technisch
| Geometrical | ID valve dimensions | 16,0 and 25,0mm // 0,63 and 0,98" |
|---|---|---|
| ID fluid channels | design depending on the tool and production concept usually DI 16mm (0,63") or 25mm (0,98") | |
| Functional | Performance: | acc. to BEV requirements (water-glycor / dielectric oil) with or without integrated fluid control valvesvalve plug variants 4-way or mixing valve |
| Temp. Range, Peak: | -40 to +110, +125°C // -40 to +230, +257°F | |
| Pressure Range: | up to 0,35 MPa // up to 50,7 psi | |
| Plug valve | PPS GF40 | use with water-glycol |
| PA9TI GF+CF | use with dielectric oil | |
| Sealing | EPDM | use with water-glycol |
| AEM | use with dielectric oil | |
| Plastic parts | PK GF / PA12 GF | Injection molded parts / adapter pieces (water-glycol) |
| PP GF | Injection molded parts / adapter pieces / laser-weldable | |
| PA9TI GF+CF / PA12 CF | Injection molded parts / adapter pieces / QC (dielectric oil) |