Charge Air – air/air

Ready-to-install air duct assemblies with optional resonator for charge air systems with direct air flow cooling

Scope of delivery

Air duct assemblies for both - hot and cold side - applications. Ready-to-install due to the integration of connecting systems, brackets, sensors and optional resonators

Advantages

  • Large variety of elastomer compounds and plastic materials
  • Extruded, injection and blow molded parts
  • Different connections, e.g. HENN-coupling or pre-fixed screw clamps
  • High temperature resistance up to 250 °C
  • Excellent flexibility of rubber hose for an optimal compensation of movements
  • Unique in-house test facility to validate all air duct assemblies
Charge Air - Air/Air Duct Assembly
Air duct assemblies with integrated connecting systems, sensors, resonator and brackets.

Technical

Hose and plastic tube specifications
GeometricHose ID / Wall thickness:16 - 64 (78 exp.) / 4.5 mm // 0.63 - 2.52" (3.07" exp.) / 0.18"
Tube ID / Wall thickness:Design depends on the tool and production concept
FunctionalPerformance:Approvals of GM / VW / Audi / Porsche / BMW / Mercedes
Temp. Range, Peak:up to 230°C (250°C) // 446°F (482°F)
Pressure Range:up to 0,36MPa // 52,2psi
Rubber hosecold side — CM/Ar/CM120°C (135°C) // 248°F (275°F)
AEM/Ar/AEM160°C (180°C) // 320°F (356°F)
Hot side — HT-ACM/Ar/HT-ACM185°C (200°C) // 365°F (392°F)
FKM/VMQ/Ar/VMQ230°C (250°C) // 446°F (482°F)
Plastic tubecold side — PA6 GFinjection mold unwelded or welded / blow mold
hot side — PA66 GF / PA.66 GF / PPS GFinjection mold unwelded or welded / blow mold